Accepted LVP
- Rigid-core SPC and WPC products are accepted.
- Flexible and glue-down LVP must be at least 5 mm thick.
- Attached padding is accepted and remains on the plank during fabrication.
- Approved overall thickness range is 5–10 mm.
STEPIT LVP fabricates made-to-order stair components and transitions from compatible LVP selected for each project. Review our available configurations, dimensional capabilities, and public starting prices below.
All products are intended for adhesive-only installation in residential interior applications.
Consumer Direct Pricing
Fabrication prices per piece based on product type and LVP thickness.
| Product | 5–6 mm | Over 6–8 mm | Over 8–10 mm | Length pricing |
|---|---|---|---|---|
| Separate stair nose | $34 | $36 | $40 | Up to 48 in. included. Add $5 over 48 in.; 64 in. maximum. |
| Full-depth stair tread/cap | $46 | $48 | $52 | Up to 48 in. included. Add $5 over 48 in.; 64 in. maximum. |
| Top-step or landing piece | $34 | $36 | $40 | Up to 48 in. included. Add $5 over 48 in.; 64 in. maximum. |
| Overlap stair nose | $34 | $34 | $34 | Supplied plank length. |
| Reducer | $39 | $39 | $39 | Supplied plank length. |
| T-molding | $39 | $39 | $39 | Supplied plank length. |
| End cap | $39 | $39 | $39 | Supplied plank length. |
| Different-height transition | Custom quote | Custom quote | Custom quote | Project-specific. |
Stair Components
Custom Stair Components & Dimensions
Fabricated from approved customer-supplied LVP, each component is made to the dimensions and configuration required for the project.
Separate Stair Noses
Standard stair noses have a 1-inch finished top depth. The Round profile is available only with a 1 1/8-inch front drop. The Modern Square profile is available with either a 1 1/8-inch or 1 5/8-inch front drop. Pieces may be fabricated up to 64 inches long.
Full-Depth Stair Treads & Caps
Full-depth components can be fabricated up to 14 inches deep and up to 64 inches long. Left, right, and double-return configurations are also available.
Top-Step & Landing Pieces
Full-plank components are fabricated for top-step and landing connections. Final dimensions are based on the approved order specifications.
Return Options
Left, right, and double returns are available. Standard returns are 14 inches long and may be shortened in the field. Left and right are determined while standing at the bottom of the staircase and looking up.
Important: Final dimensions, material compatibility,
profile selection, and configuration must be reviewed and approved
before fabrication.
Transition Components
Custom LVP Transition Profiles
Matching transition components can be fabricated from approved customer-supplied LVP when standard manufacturer accessories are unavailable, delayed, or do not meet the project requirements.
Overlap Stair Nose
An overlapping profile designed for top steps and other applications where the transition sits over the adjoining flooring edge.
Reducers
Creates a gradual transition from the LVP surface to a lower adjoining floor.
T-Moldings
Connects two flooring surfaces of similar height while covering the required expansion space.
End Caps
Provides a finished edge where LVP meets carpet, a vertical surface, a sliding-door track, or another termination point.
Different-Height Transitions
Project-specific profiles can be fabricated to accommodate different flooring elevations. The required height difference must be provided for review before pricing and approval.
Finished length: Transition length is generally limited
to the length of the supplied plank. Final profile dimensions are
subject to material compatibility and order review.
Material & Order Requirements
What We Need Before Fabrication
Every LVP product must be reviewed for compatibility before it is shipped or delivered. These requirements help prevent delays and ensure the material can be fabricated successfully.
Plank Specifications
- Minimum plank width is 6 inches.
- Minimum wear layer is 12 mil.
- Extremely dark or black LVP is not accepted.
- Final approval depends on the plank construction, finish, locking system, and flexibility.
Material Preparation
- Material must arrive in unopened manufacturer boxes.
- Loose planks and previously opened boxes are not accepted.
- Provide at least 15% extra material, with a minimum of three extra planks per order.
- Unused material will be returned with the completed order.
Turnaround Begins After Material Delivery
Production time starts after the approved material has been received and the final order details have been confirmed. Rush fabrication may be available for an additional fee.
Standard turnaround
2 business days
Orders over 100 pieces typically require 3–5 business days.
Do not ship material before approval.
Send the product specifications and order requirements to STEPIT LVP for
review before arranging shipment or local delivery.
Ordering & Fulfillment
From Order Details to Completed Fabrication
Submit the project information first so the material, dimensions, and requested configurations can be reviewed before fabrication begins.
Submit Order Details
Provide the LVP product information, quantities, finished dimensions, stair or transition configurations, and supporting photos when needed.
Receive Material Approval
STEPIT LVP reviews the flooring specifications and order requirements before the material is shipped or delivered for fabrication.
Deliver or Ship the LVP
Approved material may be dropped off locally or shipped to STEPIT LVP. Flooring must arrive in unopened manufacturer boxes with the required extra material.
Fabrication & Fulfillment
After fabrication is complete, the finished order and unused flooring may be picked up locally or shipped according to the approved order arrangements.
Customer responsibility:
The customer is responsible for providing accurate measurements,
quantities, configurations, and project information. Final order details
must be approved before fabrication begins.
Start Your Project
Ready to Start Your Custom LVP Order?
Send us your flooring information, quantities, measurements, and required configurations. We will review the project and confirm material compatibility before fabrication.
Material should not be shipped or delivered until the product and order requirements have been reviewed.